Ada banyak alasan mengapa perhiasan sangat sulit untuk difoto dengan baik. Fotografer produk profesional dapat dengan mudah menghabiskan 6 jam pementasan, pencahayaan, dan memotret satu bagian, dan waktu yang sama banyak untuk mengedit gambar. Berikut adalah beberapa cara untuk mendapatkan gambar berkualitas dari perhiasan Anda dalam waktu singkat.
Mohon maaf, konten ini hanya tersedia dalam bahasa Inggris. View a machine-translated version
Step 0 for starting your jewelry photography is a given that still seems to be forgotten: keeping the jewelry clean. Most jewelry materials take on smudges like it’s their job, so it’s best to keep a microfiber or cotton cloth with you at all times. To keep things super sterile, you might consider a pair of cotton gloves.
Like many online products, size is not always apparent in photography. When you know your product intimately, it may be difficult to spot when the scale is abstract to a buyer. It is wise to take a hard look at all your products to ensure ultimate transparency in everything you’re selling. This may include a shot of a model wearing the piece or another object to be placed in the frame for direct comparison.
You can get away with using a regular kit lens (the starter lens that comes with most DSLRs) when shooting images only intended for small web display. However, if you want to produce more detailed and higher resolution images, you should consider investing in a macro lens.
The difference between your regular lens and a macro lens is that it allows you to zoom in close to a subject without losing focus. This is especially important for shooting detail shots and small pieces of jewelry. Make sure when you’re looking for a macro lens that you look for at least a 1:1 magnification ratio, which is considered the true threshold for macro photography. This means that objects will be projected on the sensor at the same size as they appear in real life; whereas a 2:1 magnification ratio will project images at twice their size and a 1:2 ratio will project objects at half their size. A word of caution: some lenses are marketed as macro, but only have a 1:2. We found that using a “macro” lens with a 1:2 magnification ratio didn’t give us significantly better images than using our 18-55mm kit lens.
When shooting on a phone camera, a macro lens attachment can help you get closer more detailed images of your smaller jewelry. There are a lot of options out there for external phone macro lenses, but many of them don’t work well for jewelry. Many of the options require you to shoot the object extremely close (ex.10mm), which isn’t great when you’re trying to display the entire piece.
When looking for a phone lens, we wish we could say look for this magnification number or focal length but most of the values on listings for photo macro lenses seem to be either arbitrary or inaccurate. Our best advice is to make sure you’re able to find examples images that were actually taken with the lens, either in reviews or customer photos. This will give you the most accurate view of what the lens is capable of.
We had good luck with the Aukey 10x Macro clip on lens, which is compatible with most phones and is fairly inexpensive. This model’s macro lens is combined with a fisheye lens that you screw off to use the macro lens.
The flat lay for jewelry is perfectly acceptable for many styles. Get creative with chain placement for long necklaces to dazzle your customer into a sale. Have fun with the pairing of complementary items to maximize the overall look.
One way to get a perfect neck shape in a flat lay is to use a small plate (or another round object, we used a tape roll). Drape your chain around its perimeter, remove it, then take the photo.
A way to display a pendant style necklace is to create a frame out of white foam core and dangle the pendant in the middle. This an area where the clamps can really come in handy for propping and staging.
You may already be aware of the use of fishing or clear crafting wire for the display of jewelry. What may be new to you are the various ways it can be utilized to best suit your needs. Starting with a singular string, hung vertically and looped around the end of your product: this works great for a static bracelet or ring.
Use the wire horizontally, secured at each end tightly, to support earrings. If your earrings won’t stay on the one wire by themselves, add a second wire a pinch below the bottom of the pieces to hook onto their bottom half; thus creating a taut and unmoving shape to photograph.
When staging post back earrings for photographing, white foam core is, again, very useful. You’ll simply punch the back of the earring post into the foam core and photograph it.
When staging a ring, sticky tack is quite handy. Place some of it on a flat white foam core and place your ring on top.
Finally, make sure at least one or two of your images for each listing is a close-up shot. Details are one of the most important aspects of jewelry. Materials and design must be adequately highlighted for the full picture.
Your lighting setup will ultimately depend on the jewelry you’re photographing and the look you’re going for.
Either natural or artificial light can be used to great effect to light jewelry. We had great luck using two softboxes with 5500K LED bulbs.
The nice thing about these is they are fairly inexpensive, and they can produce a lot of really nice soft white light. Most of the kits available come with fluorescent bulbs included — they work but give off a purple hue. We’ve found that we get better results when using LED bulbs instead. Plus they’re significantly more energy efficient, don’t get as hot, and last longer.
Reflections are especially difficult when photographing jewelry. Our best advice is to use a lightbox. This will eliminate a great majority of unwanted reflections and give you greater control on the ones you do want.
There are several different lightboxes you can purchase. Our model has white diffuser panels on 3 sides and a drapable backdrop. Others can be set up to have all four sides covered in white with a slit opening that you’re able to take pictures through. This eliminates the need for stacking foam core to remove every unwanted dark reflection.
A solid technique for lighting gemstones is to flank the piece on both sides with two sources of soft lighting and another direct light straight on.
When choosing the direct light, make sure to never mix different color source temperatures, this can make editing a real pain. As you can see in the figure below, this method better illuminates the cut and clarity of the gemstone.
If you’re using natural light from a window (or only have one light source) white foam core is also very useful in getting more light on your piece of jewelry. This will help in counteracting unwanted shadows in a flat lay or making sure each side is more evenly lit. Angle the foam core (or a professional reflector) on the opposite side of your light source to cast more light on your subject. This will make any unwanted shadows much less apparent and give you a more even lighting on both sides.
If you still have an unwanted shadow in your photo you can just clip it out while you’re editing in Clipping Magic!
Dua kotak lunak dengan bohlam LED, kotak lampu, inti busa putih, dan sekumpulan klem dapat membantu Anda menghasilkan beberapa foto bagus perhiasan dengan mudah.
Like this article? Spread the word.
Metode pengambilan foto produk yang mungkin belum Anda pertimbangkanBaca lebih banyak »
Kiat bermanfaat untuk membuat foto yang lebih baik untuk bisnis e-commerce AndaBaca lebih banyak »
Kursus kilat tentang cara memangkas inventaris Anda secara efisien dalam waktu singkatBaca lebih banyak »
Anda mengunggah gambar yang lebih besar dari batas ukuran aktif Anda, jadi kami harus menciutkannya menjadi 4 megapiksel. Anda dapat mengkonfigurasi batas ukuran gambar Anda atau mengaktifkan Pra-Pangkas dalam dialog Opsi Input.
|Tidak ditandai||=||Algoritma memutuskan|
|Merah / Hijau||Spasi|
|Batalkan Langkah Terakhir / Ulangi Langkah Terakhir||Z / Y|
|Kuas Lebih Kecil / Lebih Besar||[ / ]|
|…||Putar Warna Latar Belakang||B|
|Rotasi Kiri / Kanan||R / T|
|Memperlurus Kiri / Kanan||Geser + R / T|
|Perlebar||← ↑ ↓ →|
|Tinjau Kontur||D / F|
|Lihat Panel||1 / 2|
Pelebaran otomatis untuk tinjauan.
Tombol mouse tengah selalu untuk memperlebar.
Tandai kedua Foreground dan Background untuk mendapatkan hasil
Hapus Tanda Yang Melewati Batas dan gunakan Scalpel untuk kontrol presisi dari batas.
Pasar eCommerce sering kali mengharuskan item yang dijual memiliki latar belakang putih dan dipotong agar item berada di depan dan tengah. Kami merekomendasikan membuat sesuai dengan hasil pada latar belakang putih sebagai basis untuk gambar Anda. Info